Kuaishou Ads(China Domestic) campaign configuration

At a glance: KWAI MARKETING is an AppsFlyer ad network integrated partner.

Setting Up KWAI MARKETING

Go to the dashboard of your app and click on Integrated Partners on the left bar.

Integrated_Partners_link.png

Enter "kuaishou_int" in the search field and click on its logo to open KWAI MARKETING's configuration window.

mceclip1.png

KWAI MARKETING's configuration window includes 3 active tabs: Integration, Attribution link, and Permissions. Click on the items below to read about the tabs setup.

For a detailed description of the Partner Configuration Window Header, click here.

 Tip

  • The General Settings step in the Integration tab is mandatory for all partners
  • All the rest of the steps are either descriptive or optional

Integration Tab

Activate Partner

On the first visit here, you will need to toggle below. ON the Activate Partner button to enable setup of the integration tab's parameters. The toggle MUST be ON for as long as you work with the partner.
For more details about partner activation please click here.

Default Postbacks

mceclip2.png

In-app events settings

In this section you can map your AppsFlyer events with KWAI MARKETING via postbacks.

mceclip0.png

  1. Toggle In-App Event Postbacks to ON
  2. Click Add Event to add an SDK Event to the list
  3. Complete the following parameters:
Parameter Name Description
SDK Event Name The name of the event, as received by AppsFlyer either from the SDK integrated in your app, or from server to server events.
Tip - If you don't see the event you want in the list, make sure to activate the event on a device with a non-organic installation and recheck.
Partner Event Identifier The unique name or ID of each event as defined on iQIYI Ads side.
Obtain the corresponding Event ID from iQIYI Ads and set in the text field.
Send Revenue When unchecked - AppsFlyer sends all the parameters of the rich in-app event to the partner, except for the revenue parameter, which is contained in the af_revenue parameter.
When checked - AppsFlyer sends all the parameters including the revenue value (if it exists in the event).

 

Attribution Link Tab

In this tab, you can create the attribution links you want to send to KWAI MARKETING for attributing KWAI MARKETING's campaigns, ad sets or even single ads. Note that AppsFlyer DOES NOT save your generated partner's attribution links.

mceclip3.png

This tab is divided into different sections:

Attribution Link Parameters

In this section, select which parameters you want to add to the attribution link.

Adding parameters to the attribution link here enables you to later perform thorough drill-down analyses. Parameters that are already defined on the attribution link can be edited by adding them and their new values here.

  • Campaign - add it to compare different campaigns running with KWAI MARKETING.
    Attribution link parameter: c
  • Adset - set ad set names to compare different ad sets within specific KWAI MARKETING campaigns.
    Attribution link parameter: af_adset
  • Ad Name - set ad set names to compare different creatives within specific ad sets within specific campaigns KWAI MARKETING.
    Attribution link parameter: af_ad
  • Site ID and Sub Site ID - set Site ID parameter to attribute installs to specific publishers. If many publishers exist, we advise on limiting the number of used site IDs and using the sub site ID parameter, to avoid exceeding the site ID limitations.
    Attribution link parameters: af_siteid and af_sub_siteid
  • Subscriber Parameters - use any of the 5 subscriber parameters to insert useful values. Note that these parameters get parsed and appear in the raw data report, which makes them very handy for performing data aggregation or filtering.
    Attribution link parameters: af_sub1, af_sub2, af_sub3, af_sub4, af_sub5

attribution-link-parameters.png

Add any other parameter to the attribution link simply by typing it in a new parameter box. For more information about AppsFlyer's Attribution Link Structure and Parameters.

Click-Through Attribution

This slider allows you to set the maximum time from click to install. Only installs (first launches) that take place within the lookback window may be attributed to KWAI MARKETING.

Attribution link parameter: af_click_lookback

More details about the click lookback window here.

netease-click-through.png

Click Attribution Link

This is the attribution link that contains all the setup information you have set for it. Send it to KWAI MARKETING to be activated when leads click on a corresponding ad.

View-through attribution lookback window

This slider allows you to set the maximum time from impression to install. Only installs (first launches) that take place within this lookback window, following an ad impression, are attributed to KWAI MARKETING, providing there was no other relevant ad click.

You can customize this value to 1-23 hours or 1-7 days.

Attribution link parameter: af_viewthrough_lookback

More details about the view-through attribution here.

Impressions attribution link

The impression attribution link contains similar attribution data to the click recording link (besides the different lookback window). Send it to KWAI MARKETING to be activated when a corresponding ad is watched, usually for 1 second or more.

Cost Tab

Cost data is not supported in the integration with this partner.

Ad Revenue Tab

Ad Revenue is not supported in the integration with this partner.

Permissions Tab

In this tab, you can select the permissions to grant KWAI MARKETING, whether the partner acts as an ad network, agency or even both. Note that even if attribution is disabled for KWAI MARKETING, the permissions tab is active and you can grant control to KWAI MARKETING.

rtb_house-permissions-new.png

Ad Network Permissions

Use these toggles to give the ad network permissions to handle its own configuration for your app:

  • Allow to configure integration - permit the partner to setup the integration tab (except in-app event postbacks)
  • Allow to configure in-app event postbacks - permit the partner to setup in-app event postbacks mapping to itself on the integration tab
  • Allow access to your retention report - only to the partner's own retention data
  • Allow access to your Protect360 dashboard - only to the partner's own Protect360 data, and providing the feature is enabled for the advertiser

Learn more about granting ad network permissions.

Was this article helpful?