Verizon Media campaign configuration

At a glance: Verizon Media (formerly Yahoo Gemini/Oath), an AppsFlyer ad network integrated partner, offers search and native advertising in one advertising platform. In addition to click-based mobile attribution, Verizon Media offers cost and view-through attribution, which can be recorded with AppsFlyer.

Setting up Verizon Media

To configure your campaigns with Verizon Media, follow the steps below.

Go to the dashboard of your app and click on Integrated Partners on the left bar.


Enter "Verizon Media" in the search field and click on its logo to open the Verizon Media configuration window.


Verizon Media configuration window includes 3 active tabs: Integration, Cost, and Permissions. Click on the items below to read about the tabs setup.

For a detailed description of the Partner Configuration Window Header, click here.


The General Settings step in the Integration tab is mandatory. All other steps are descriptive or optional.

Integration tab

Advertiser configuration

The Integration Tab is divided into different sections as described below.

Activate partner

On the first visit here, you will need to switch ON the Activate Partner toggle to enable the setup of the integration tab parameters. The toggle MUST be ON for as long as you work with the partner.

For more details about partner activation please click here.

General settings

Follow these steps for the general settings of Verizon Media.

Click-through attribution

This slider allows you to set the maximum time from click to install. Only installs (first launches) that take place within the lookback window may be attributed to Verizon Media.

You can customize this value to 1-23 hours or 1-30 days. We recommend setting the Click-through lookback window to 7 days, to align with Verizon Media.

More details about the click lookback window here.

Enable View-Through attribution

Toggle this to ON if you want to attribute view-through installs from Verizon Media. The view-through lookback slider is available on the attribution link tab (described below).

You can customize this value to 1-23 hours or 1-7 days. We recommend setting the View-through lookback window to 1 day, to align with Verizon Media.


Agency configuration

Before you start working with Verizon Media, the advertiser should activate the integration on their side, otherwise conversions cannot be attributed to you.

Enter your Verizon Media account ID.


  • In case Advertiser and Agency both promote the app in Verizon Media, they need to work with separate Verizon Media accounts.
  • Agency can use only one account at Verizon Media.

To find your account ID, log into Verizon Media dashboard, click the cog icon to open the Settings menu, and select Billing:


Click-through and view-through lookback windows are in read-only mode and should be configured by the advertiser.

In-app events settings

In this section, you can map your AppsFlyer events with Verizon Media via postbacks.

oath in-app events postback configuration

  1. Enter the Dot Tag ID provided by Verizon Media.

    To find it on Verizon Media dashboard, click the cog icon to open the Settings menu and select View Dot tag code. Copy the code from the dashboard:


  2. Toggle In-App Event Postbacks to ON
  3. Select the Sending Option for all SDK-defined events.
    - Only events attributed to this partner for events coming only from users attributed to this partner
    - Events attributed to any partner or organic to have your entire user base available to be reported to the partner
  4. Click Add Event to add an SDK Event to the list
  5. Complete the following parameters:
Parameter Name Description
SDK Event Name The name of the event, as received by AppsFlyer either from the SDK integrated in your app, or from server to server events.
Tip - If you don't see the event you want in the list, make sure to activate the event on a device with a non-organic installation and recheck.
Partner Event Identifier The unique name or ID of each event as defined on the Verizon Media side.
Obtain the corresponding Event ID from Verizon Media and set in the text field.
Send Revenue When unchecked - AppsFlyer sends all the parameters of the rich in-app event to the partner, except for the revenue parameter, which is contained in the af_revenue parameter.
When checked - AppsFlyer sends all the parameters including the revenue value (if it exists in the event).


For agencies, the Sending option and the list of events available for mapping depend on the permissions given to the agency by the advertiser.

Attribution link tab

This tab is not applicable for Verizon Media.


For all SRNs, such as Facebook, Apple Search Ads, Adwords, Snapchat, etc. this tab is not functional, as they do not use external attribution links.


Cost tab

Enabling and testing Verizon Media cost integration

  1. The Cost tab allows you to receive cost data.
    Note: Cost data requires an Xpend subscription. Without Xpend, only click and impression data are received.


  2. Select the Get Cost, Clicks, and Impressions data toggle.
  3. Click API Authentication to redirect you to your Yahoo account.

    If you are not signed in please do so and then press the below highlighted Agree button.
  4. Make sure that you log in to the Yahoo account that you are running the campaigns from.


    If the connection was successful, the following message is displayed: "You have successfully connected Verizon Media cost data."
  5. Close this tab to return to the AppsFlyer dashboard.
  6. Click Save & Close.

Cost data sync status

The cost tab shows the status of your cost integration and the last time AppsFlyer managed to pull matching cost data.

Verizon Media allows you to sync several accounts for pulling cost data. For each synced account, AppsFlyer shows the status of cost integration and the last time AppsFlyer managed to pull matching cost data.


The table below describes five different status messages, and what to do if you see them in the cost tab.

Status Message Description What to Do


Partner API is responding and returning data.




With sync message:

Cost Data was never successfully pulled

One of the following is possible:

  1. You just set up the integration and AppsFlyer have yet to pull data.
  2. There is no data in AppsFlyer about installs coming from the ad network.
  1. Wait for AppsFlyer to pull data.
  2. Start running campaigns with the ad network.


No Matching Data


AppsFlyer queries this app's active campaigns with the Partner API, but the partner API isn't returning any data for these campaigns.

This might happen if you change the campaign ID while it is still running.


If you rely on cost data, do not change the IDs of campaigns while they are still active and running.


Also, make sure you entered the API credentials for the correct app, and that the network is passing the correct campaign IDs on the attribution link.

Partner API is not responding

The ad network cost data API is either down or experiencing issues.

Wait for the network API to become responsive.

Invalid Credentials

Cost API credentials are incorrect. AppsFlyer is unable to pull cost data.

Make sure that the cost API key is correct. 

Last successful data pull

The cost tab shows the last time cost data has been pulled yet. If cost data has never been pulled, the sync message shows Cost Data was never successfully pulled.



Scenario 1: Stopped campaigns

AppsFlyer pulls cost for several campaigns that you run with ad network A. You look in the cost tab and you see the message Last successful sync 2 hours ago. The same day you stop running campaigns with ad network A. Two weeks later, you look in the cost tab of ad network A. You then see the message Last successful sync 14 days ago.

Scenario 2: Ad network API issues

AppsFlyer pulls cost for several campaigns that you run with ad network B. You look in the cost tab and you see the message Last successful sync 2 hours ago. Ad network B then experiences issues with their API. It takes them a few hours to fix it. When you look in the cost tab you see the message Last successful sync 8 hours ago.

Stop Verizon Media cost sync

To stop getting Verizon Media cost and to delete a connected Verizon Media account:


Once you set Verizon Media's cost do not change the name of any running campaign, ad set, or single ad, as it may cause serious discrepancies or missing cost data.

Ad revenue tab

Ad Revenue is not supported by this partner.

Permissions tab

In this tab, you can select the permissions to grant Verizon Media. Note that even if attribution is disabled for Verizon Media, the permissions tab is active and you can grant control to Verizon Media.


Use these toggles to give the ad network permissions to handle its own configuration for your app:

  • Allow to configure integration - permit the partner to set up the integration tab (except in-app event postbacks)
  • Allow to configure in-app event postbacks - permit the partner to setup in-app event postbacks mapping to itself on the integration tab
  • Allow access to your retention report - only to the partner's own retention data
  • Allow access to your aggregate loyal user data - only to the partner's own loyal user data
  • Allow access to your aggregate in-app events data - only to the partner's own in-app events data
  • Allow access to your aggregate revenue data - only to the revenue data attributed to the partner
  • Allow access to your Protect360 dashboard - only to the partner's own Protect360 data, and providing the feature is enabled for the advertiser

Learn more about granting ad network permissions.

Marking events as conversions in Verizon

You can mark as conversions the events that AppsFlyer sends to Verizon through in-app event postbacks. To do so, on Verizon Media, go to Shared library > Conversion rules, click New rule, and follow the prompts:


Verizon Media raw report

AppsFlyer receives the following parameters from Verizon Media and maps them to the following fields in the raw reports.

Verizon Media Parameters AppsFlyer Raw Report Parameters
Creative ID Ad ID
Creative Name Ad
Adgroup ID Adset ID
Adgroup Name Adset
Campaign ID Campaign ID
Campaign Name Campaign
Site ID Site ID


  • When you enable attribution for the first time, it takes up to 4 hours to be reflected in the Verizon Media UI.
Was this article helpful?